1. Remove the cap from the finger pricker.

2. Insert the new lancet drum, white end first.

Do not remove the lancet drum until all 6 lancets have been used.

The lancet drum is properly inserted when it is completely inside the finger pricker and only the front edge protrudes.

The cap is on correctly when it is pushed back as far as it will go, and you hear and feel it click into place.

The cap can only be easily placed on up to the stop position when the lancet drum is completely inside the finger pricker.

Do not use force to place the cap on. This might damage the cap and finger pricker. Instead, correct the position of the lancet drum.

4. Rotate the cap until the desired penetration depth lines up with the indicator.

When obtaining blood, start with medium penetration depth, such as 3.

5. Loading a new lancet: Prepare the finger pricker for obtaining blood again.

Push the lever 1 in direction A and then back again in direction B.

Do you need help? We are always available for a chat. 

Preparing the lancing device